Kodak A-61597 - Manual (Page 10)

8 A-61591 / Part #9E8651 January 2008
Omit printing on
more than one
document
The Disable Print function allows you to temporarily disable printing on
all documents in a batch. This may be useful if rescanning a stack of
documents that have already been printed.
The Disable Print function is only available after the scanner is enabled
(scanning started from the host PC). If you want to disable printing for
the first document in the batch, then your host software should be set
up to NOT automatically start scanning.
The Disable Print button is only available if printing has been enabled
by the scanning application. Once Disable Print is turned on, no
documents will be printed on until one of the following occurs:
• Disable Print is turned off, or
• the scanner is disabled because there are no more documents to
scan (End Job) or a multifeed occurs and the scanner is set up via
the Stop Scanning option on jam.