Kenwood LZ-760R - Manual (Page 15)

English | 15
Station Preset Memory
Putting the station in the memory.
1 Select the band
Touch the [Band] button.
2 Select the channel to put in the memory
Touch the [ 4] or [¢] button.
3 Put the channel in the memory
Touch the [P1] — [P8] button for at least 1
seconds.
On each band, 1 station can be put in the
memory on each [P1] — [P8] button.
Auto Memory Entry
Putting stations with good reception in the
memory automatically.
1 Select the band for Auto Memory Entry
Touch the [Band] button.
2 Open Auto Memory Entry
Touch the [AME] button.
3 Do Auto Memory Entry
Touch the [ 4] or [¢] button.
When 8 stations that can be received are put in
the memory Auto Memory Entry closes.
• If you make no button operation for 10 seconds, the Auto
Memory Entry is automatically cancelled.
Recalling a Preset Station
1 Select the band
2 Call up the station
Touch the [P1] — [P8] button.
is connected)
Exit the Control Screen
Touch the [OK] button.
• If you make no button operation for 10 seconds, the
control screen is automatically cancelled.