Kenwood LZ-760R - Manual (Page 10)

10 | English
Setting the AV Output [AV-OUT]
Touch Setting
[ 7Normal] Picture/sound with monitor
picture.
[ 7Video 1]/
[ 7NAV]
Picture/sound from AV-IN1
terminal.
[ 7Video 2]/
[ 7R-Cam]
Picture/sound from AV-IN2
terminal.
[ 7TV] Picture/sound from television.
(During the KTC-V500N,
KTC-V500P or KTC-V500E is
connected)
Switching the Setup Screen-1
Touch the [ 2 ] button.
Exit the System Setup Screen-2
Touch the [Return] button.
Return to the setup menu screen.
System Setup Screen-2
Select the AV-IN2 input display
Selecting the display when this device is switched
to internal AV-IN2 terminal input source.
Touch the [Video 2] or [R-Cam] button.
Setting the Rear view camera image [Mirror]:
(AV-IN2 setting during "R-Cam")
Touch Setting
[ 7On] The image which appeares in
the camera is turned left-side
right and displayed.
[ 7Off ] The image which appeares in
the camera is displayed as it is.
Touch Sensor Tone [BEEP]
Setting the operation check sound (beep sound)
ON/OFF.
Touch Setting
[ 7On] Touch sensor tone is turned on.
[ 7Off ] Touch sensor tone is turned off.
Switching the Setup Screen-2
Touch the [ 3 ] button.
Exit the System Setup Screen-1
Touch the [Return] button.
Return to the setup menu screen.
System Setup Screen-1