Kensington M Series User Manual
Page 35
26 Ascentia M Series User’s Manual
The floppy cable must be inserted as shown in Figure 11. To
insert the cable correctly, make sure that
•
The arrows printed on the cable connectors are both
facing upward.
•
The cable bead is close to the computer, not the floppy
drive.
If the cable does not fit easily, do not force it.
Make sure you have the correct end of the cable
going to the computer and to the floppy drive.
To remove the cable:
1.
Press in and hold the tabs on the side of each cable
connector.
2.
Pull the cable connectors away from the floppy drive and
the computer.
3754-1.bk : 3754-2.fm Page 26 Wednesday, July 30, 1997 2:33 PM