Kensington M Series - Manual (Page 21)

12 Ascentia M Series User’s Manual
You can also perform a soft boot by saving your files and
pressing .
You can perform a cold (or hard) boot by pressing the power
button to turn the computer off, waiting five seconds, and then
pressing the power button to turn the computer on.
Tips for Using Your Computer
The following information helps you avoid potential problems
as you use your computer:
Do not try to disassemble your computer.
Opening the system chassis voids your
warranty. Only an authorized AST service center
can replace or add any parts inside the chassis.
•
Follow all the instructions and cautions in your
computer user documentation.
•
The LCD has a polarized surface and can be damaged
easily. To prevent damage, avoid touching the screen.
•
Use only AST approved AC adapters, automobile
adapters, airline adapters, and memory modules.
•
Because a portable computer is small and has restricted
air flow around components, it is more likely to overheat
than a desktop computer. A fan inside your computer
runs when needed to help eliminate some heat. Make
sure the fan vent on the side of your computer is not
blocked when you use the computer. (See Figure 1 on
page 5 for the location of the vent.) Occasionally check
the vent and remove any accumulated dust on the
outside.
•
Avoid using or storing the computer in extremely hot or
cold areas, such as a car on a hot day. Keep the computer
away from heaters and out of direct sunlight. Exposure
to excessive heat may damage computer components.
If you have left your computer in a hot place, let it cool
down slowly to room temperature (with the LCD panel
open) before using it.
3754-1.bk : 3754-1.fm Page 12 Wednesday, July 30, 1997 2:33 PM