Kenwood VRS-6100 - Manual (Page 27)

27 EN
Listening to radio broadcasts
Receiving preset stations
INPUT SELECTOR
TUNER
1
Use the INPUT SELECTOR key (or the TUNER key) to select
tune as the source.
2
Enter the number of the preset station you want to
receive (up to "40").
Press the numeric keys in the following order:
For "15", press 0,5
For "20", press 0,0,)
• If you make a mistake entering a two digit number, press the +10
key repeatedly to return to the original display and start again.
)3 7 5 8 )
Numeric keys
Receiving preset stations in order (P.CALL)
INPUT SELECTOR
TUNER
P.CALL 4/ ¢
1
Use the INPUT SELECTOR key (or the TUNER key) to select
tune as the source.
2
Use the P.CALL 4 / ¢ key to select the desired station.
• Each time you press the key, another preset station is received in
order.
Pressing the P.CALL ¢ does the following:
Pressing the P.CALL 4 does the following:
Holding down the P.CALL ¢ or 4 key, lets you skip through the
presets, receiving each preset station at 0.5 second intervals.
*5484/16-27/EN 04.5.17, 8:34 AM 27