Kodak 8657 - Manual (Page 10)

Installing the Software
2-2 March 1998
Requirements for SCSI-Connected Installations
• an Adaptec SCSI host adapter board
NOTE: Kodak tested the AHA 1542 and 2940 boards.
Other cards may work but have not been tested.
Fast, wide, and ultra are not supported. These
features must be disabled on the SCSI host
adaptor board for the SCSI ID to which the printer
is assigned. Refer to the documentation that
came with the adapter board for instructions on
disabling these features.
• a SCSI cable
• a SCSI terminator
• Adaptec EZ–SCSI Software. This software is
commonly provided with ADAPTEC SCSI host
adapter boards when they are purchased. The
supplier of your board should be able to provide the
software if you do not have it, or you can purchase it
through Adaptec directly.
NOTE: Windows 4.0 requires EZ-SCSI 4.01b.
Refer to Appendix C: “About SCSI Connection,” for more
information.