General features, Attenuator, System q – Kenwood KDC-MP6029 User Manual
Page 8: Audio control 1, Audio setup

8
|
English
General features
Attenuator
Turning the volume down quickly.
Press the [ATT] button.
Each time the button is pressed, the Attenuator
turns ON and OFF.
When it’s ON, the "ATT" indicator blinks.
System Q
You can recall the best sound setting preset for
different types of music.
1
Select the source to set
Press the [SRC] button.
2
Select the Sound type
Press the [Q] button.
When the button is pressed once, the current
sound setting is displayed.
Each time the button is pressed, the sound
setting switches.
Sound setting
Display
Natural
"NATURAL"
User memory*
"USER"
Rock
"ROCK"
Pops
"POPS"
Easy
"EASY"
Top 40
"TOP40"
Jazz
"JAZZ"
• *User memory: The values set on the
(page 8).
KDC-MP5029 doesn't have the User memory function
so the values of Bass, Middle, and Treble set in audio
control are replaced to the System Q values and
"USER" is not be displayed when the System Q setting
is changed.
• Each setting value is changed with the Setting> (page 9). Audio Control 1 Select the source for adjustment Press the [SRC] button. 2 Enter Audio Control mode Press the [VOL] knob. 3 Select the Audio item for adjustment Press the [VOL] knob. 4 Adjust the Audio item Turn the [VOL] knob. Adjustment Item Display Range Subwoofer level * 1 * 2 "SW L" –15 — +15 Bass level "BAS L" –8 — +8 Middle level "MID L" –8 — +8 Treble level "TRE L" –8 — +8 Balance "BAL" Left 15 — Right 15 Fader "FAD" Rear 15 — Front 15 • * 1 You can control this item when Output> (page 9) is set to "SW ON". • * 2 Function of the KDC-MP6029 5 Exit Audio Control mode Press any button. Audio Setup Setting the Sound system, such as Cross over 1 Select the source for adjustment Press the [SRC] button. 2 Enter Audio Setup mode Press the [VOL] knob for at least 1 second. 3 Select the Audio Setup item for adjustment Press the [VOL] knob. 4 Setup the Audio item Turn the [VOL] knob.
First, select the speaker type with the Speaker setting.
Each time the knob is pressed, the items that can
be adjusted switch as shown below.
Press the button which is not [VOL] knob and
[ATT] button.
Network.
Each time the knob is pressed, the items that can
be adjusted switch as shown below.