beautypg.com

Kenwood KDC-MP6029 User Manual

Page 13

background image

English

|

13

Example:

Desired frequency

Press button

92.1 MHz (FM)

[0], [9], [2], [1]

810 kHz (AM)

[0], [8], [1], [0]

Canceling Direct Access Tuning

Press the [DIRECT] button on the remote.

Station Preset Memory

Putting the station in the memory.

1

Select the band

Push the Control knob to [FM] or [AM].

2

Select the frequency to put in the memory

Push the Control knob to [

4] or [¢].

3

Put the frequency in the memory

Press the desired [1] — [6] button for at least
2 seconds.
The preset number display blinks 1 time.
On each band, 1 station can be put in the
memory on each [1] — [6] button.

Auto Memory Entry

Putting stations with good reception in the
memory automatically.

1

Select the band for Auto Memory Entry

Push the Control knob to [FM] or [AM].

2

Open Auto Memory Entry

Press the [AME] button for at least 2 seconds.
When 6 stations that can be received are put in
the memory Auto Memory Entry closes.

Preset Tuning

Calling up the stations in the memory.

1

Select the band

Push the Control knob to [FM] or [AM].

2

Call up the station

Press the desired [1] — [6] button.

Frequency Step Setting

Changing the tuning frequency step.
The original setting is FM band 50 kHz, and AM
band 9 kHz.

1

Turn the power OFF

Press the [SRC] button for at least 1 second.

2

Switch the frequency step

While pressing the [1] and [5] button, press
the [SRC] button.
Release your fingers from the button after the
display is appeared.
The frequency step changes to FM band 200 kHz,
and AM band 10 kHz.

• When the same operation is repeated, it returns to the

original setting.

• When the frequency step is switched, the frequencies

in the memory are deleted.

Function of the KDC-MP6029
Function of LX BUS Television

TV Tuning

The TV channel of a connected LX BUS Television
(optional accessory) can be selected.
The action depends on the setting of the
connected LX BUS Television. Refer to the user
instruction of the LX BUS Television for details.

1

Select TV source

Press the [SRC] button.
Select the "TV" display.

2

Select the TV band and Video input

Press the [FM] button.
Each time the [FM] button is pressed, TV bands
and Video input switch.

3

Select the TV channel

Push the Control knob to [

4] or [¢].

This manual is related to the following products: