KTI Networks KS-2240 - Manual (Page 14)

-14-
• 10/100BASE-TX Fast Ethernet Switched Ports
Each switched port supports one connection to a LAN segments. Each
segment is an independent shared network in one collision-domain.
The connection can be to either a 10BASE-T or a 100BASE-TX device.
• MDI-X and MDI RJ-45 Connectors
MDI-X jack is labeled [X] normally to indicate the jack is designed
with internal crossover function. It allows a connection to an end
station using straight-through UTP cable. MDI RJ-45 connector is
provided for easy uplink via standard straight-through UTP to
other device that supports MDI-X RJ-45 connector. The following
table shows the pin assignments of MDI-X and MDI RJ-45
connector respectively:
PIN# MDI-X Jacks MDI Jack
1 Rx+ Tx+
2 Rx- Tx-
3 Tx+ Rx+
6 Tx- Rx-
4,5,7,8 NC NC
• Gigabit Ethernet Slots
Two Gigabit Ethernet slots are provided for Gigabit connections. Each
can accommodate one Gigabit Ethernet module. A variety of optional
modules is available for selection. Refer to section 3.3 for more infor-
mation.