KORG M50 - Manual (Page 19)

16
Basic functions and operation
Start-up
M50 Editor
• From the “KORG”-“M50” folder, start up “M50 Editor.”
Note: When you start up the editor, the M50 programs and other settings can be loaded
automatically. (See p.27 “Software Setup (Initial settings for M50 Editor)”)
Don’t touch the keyboard or the mouse of your computer while data is being sent or received.
Windows XP / Windows Vista
Access the “KORG” folder from the taskbar via [Start] – [All Programs].
Mac OS X
The “KORG” folder is located in the “Applications” folder.
M50 Plug-In Editor
For details on starting-up the M50 Plug-In Editor, refer to the section for your host application in
“Setting up the M50 Plug-In Editor” (
) p.8).
Note: When you start up the editor, the M50 programs and other settings can be loaded
automatically. (
) p.27 “Software Setup (Initial settings for M50 Editor)”)
Don’t touch the keyboard or the mouse of your computer while data is being sent or received.
About the Preload data
Start up M50 Editor, and execute Receive All to load all data into M50 Editor. Then save this data
to a file as preload data.
You can now create a setting for this data file to be automatically loaded when you start up M50
Editor, the start-up time will be shortened because you won’t need to load the data from the M50.
( ) p.27 “Software Setup (Initial settings for M50 Editor)”)