Kenwood DDX8017 - Manual (Page 64)

64 | English
Speaker Set Up
You can select a speaker type and its size to get the
best sound effects.
1 Select a speaker you wish to adjust
(Page 62 7)
Speaker Set Up screen
Use Tweeter
Speaker
MENU X'Over
Front
7inch
1
2
3
5
4
Use Tweeter
Speaker
MENU X'Over
Front
7inch
1
2
3
5
4
3
2
1 Center speaker
2 Front speaker
3 Rear speaker
4 Subwoofer
5 Tweeter setup
You can set the tweeter when you are selecting
front speakers.
If you are using a tweeter together with the
front speakers, set the tweeter to "Use". In the
"Use" position, the Equalizer is adjusted to its
best position.
2
Select a speaker type
You can select any of the following speaker types.
Center speaker:
NONE, 2 3/4x1 9/16 inch, 2 inch, 4 inch, 5 inch,
6 1/2 inch over
Front speakers:
OEM, 4 inch, 5 inch, 6 1/2 inch, 6 3/4 inch, 7 inch,
4x6 inches, 5x7 inches, 6x8 inches, 6x9 inches,
7x10 inches
Rear speakers:
NONE, OEM, 4inch, 5inch, 6 1/2inch, 6 3/4inch,
7inch, 4x6inches, 5x7inches, 6x8 inches,
6x9 inches, 7x10 inches
Subwoofer:
NONE, 6 1/2 inch, 8 inch, 10 inch, 12 inch,
15 inch over
• Select "NONE" if you have no speakers.
• If you set the center speaker to "NONE" even in a short
time when you are setting the Surround Control (page
92) to "Bypass+Center", the Surround Control is set to
"Bypass" automatically.
• If you set the center and rear speakers to "NONE"
when you are setting the Surround Control (page 92)
to "Dolby PL II", the Surround Control is set to "Bypass"
automatically.
• If you set the rear speakers to "NONE" when you are
setting the Surround Control (page 92) to "CS II", the
Surround Control is set to "Bypass" automatically.