Kenwood DDX8017 User Manual
Page 104
104
|
English
The following messages are displayed when
certain problems are occurring in your sys-
tem. Take the recommended actions.
Hot Error
The protection circuit in the unit activates when the
temperature inside the unit exceeds 60°C (140°F),
stopping all operation.
] Cool down the unit by opening the windows or
turning on the air conditioner. As the temperature
falls below 60°C (140°F), the disc will start playing
again.
Hold Error
The protection circuit in the unit activates when
the temperature inside the automatic disc changer
exceeds 60°C (140°F), stopping all operation.
] Cool down the unit by opening the windows or
turning on the air conditioner. As the temperature
falls below 60°C (140°F), the disc will start playing
again.
Mecha Error
The disc player is malfunctioning.
] Eject the disc and try inserting it again. Contact the
Kenwood dealer if this indicator continues blinking
or the disc cannot be ejected.
Disc Error
The unplayable discs is inserted.
Read Error
The disc is upside-down.
] Load the disc with the labeled side up.
The disc is quite dirty.
] Clean the disc, referring to the section on cleaning> (page 13). Region code Error Parental level Error Error 07 — 67 ] Press the reset button on the unit. If the "Error ##" code does not disappear, consult your nearest Troubleshooting Guide
The DVD software encoded for other region code.
The parental level is set to high levels.
The unit is malfunctioning for some reason.
service center.