Kenwood DDX8017 - Manual (Page 27)

English | 27
Before Use CD/MP3/WMA/JPEG/MPEG/Disc Changer Play Control
Set Disc Name
Names a CD.
1 Play a CD you wish to name
2 Call the CD/Disc Changer Menu
MENU
3
Select the Set Name mode
Name Set
• The Name Set position varies depending on the disc
you are playing.
4
Enter a name
For character entry details, see
(page 57).
5
Exit the Set Name mode
OK
• You cannot name an MD or MP3/WMA/JPEG/MPEG
disc.
• You can store up to 100 disc names in memory.
The receiver’s Set Disc Name function uses the Memory
Function of the receiver itself, rather than the memory
function of disc changer or others.
Therefore, you can store up to 100 disc names
independent from the memory function of the
attached device.
• You can set a disc name only after you have applied the
parking brake.
Select Folder (during MP3/WMA/JPEG/
MPEG play)
The folders of an MP3/WMA/JPEG/MPEG disc are
listed for quick search.
1 Call the MP3/WMA/JPEG/MPEG Menu
MENU
2
Start the Select Folder
Folder Select
DVD MEDIA
ROOT
Fol
Open
7. Folder Name
8. Folder Name
9. File Name
10. File Name
2. Upper Folder Name
2. Upper Folder Name
MENU
3
2
5
4
6
1
6
7
8
8
1 Returns to the root directory.
2 Displays the next higher level of hierarchy.
3 Displays a folder if the subdirectory has a folder
without files. When you touch the folder, it
opens.
4 Displays a folder if the subdirectory has files
without a folder. When you touch the folder, it
opens.
5 Displays a folder if the subdirectory has both
files and folders. When you touch the folder, it
opens.
6 Displays the MP3/WMA/JPEG/MPEG files. When
you touch a file, its data is played back.
7 Plays the selected folder.
8 Scrolls the list.
3 Select a song
##. File Name
Display the desired song and touch the file display.