Kodak DC3400 - Manual (Page 85)

5
77
Setting a Flash Default
Adjust your camera so that it is set to a specific flash setting every time you turn
on the camera. For more information about the Flash setting, see page 19.
1 Set the Mode dial to Camera Setup.
2 Slide the POWER switch to the right to
turn on the camera.
The main Camera Setup screen appears.
3 Press a button until the icon
is highlighted.
4 Press the DO-IT button.
The Flash Default screen appears. The
current setting is checked (9).
5 Press a button until the Flash
option you want is highlighted.
 AUTO (Main Default)—flash fires
when needed. Ideal for everyday
picture-taking situations.
 FILL—flash fires every time you take
a picture. Ideal for pictures outside
under heavy shade.
 RED EYE—flash fires once so the
eyes become accustomed to the flash,
then fires again when the picture is
taken. Ideal for pictures of people.
 OFF—flash does not fire.
6 Press the DO-IT button to accept the
changes and return to the main Camera
Setup screen.
MENU
REVIEW
CONNECT
SETUP CAMERA
CAPTURE
/
/