Kodak DC3400 - Manual (Page 124)

116
Camera
Problem Cause Solution
Picture is too light. The flash is not
needed. Change to Auto flash.
See page 19. Check
the flash default
setting. See page 77.
The subject is too
close when the flash
was used. Move so there is at
least 1.6 ft (0.5 m)
between the camera
and the subject.
The light sensor is
covered. Hold camera so your
hands or other
objects do not cover
light sensor.
The Exposure
Compensation is set
incorrectly. Decrease the
Exposure
Compensation. See
page 28. Check the
Exposure
Compensation default
setting. See page 80.
Stored pictures are damaged. Camera memory card
removed when Ready
light was blinking.
Be sure Ready light is
not blinking before
removing card.
Picture is black and white,
sepia toned, or has too much
contrast. The Effects setting is
set incorrectly. Change the Effects
setting to No Effects.
See page 32. Check
the Effects default
setting. See page 82.