Putting yourself in the picture – Kodak DC3400 User Manual
Page 31
2
23
Putting Yourself in the Picture
There might be times when you want everyone, including yourself, to be in the
picture. For these occasions, use the Self-Timer feature to create a 10-second
delay between the time you press the SHUTTER button and the time the picture
is taken.
1 Set the Mode dial to Capture.
2 Slide the POWER switch to the right to
turn on the camera.
3 Press the SELF-TIMER button.
The Self-timer icon appears in the
Status Display.
If you want to cancel self-timer before the
picture is taken, press the SELF-TIMER
button again or turn off the camera.
4 Place the camera on a flat, steady surface
or tripod.
5 Frame your subject in the viewfinder and
press the SHUTTER button.
The red Self-Timer light, on the front of
the camera, turns on and stays lit for 8
seconds, then flashes for 2 additional
seconds just before the picture is taken.
The Self-Timer turns off when the picture
is taken.
MENU
REVIEW
CONNECT
SETUP
CAMERA
CAPTURE