Using a serial cable connection, Connecting to a windows-based computer – Kodak DC3400 User Manual

Page 104

Text mode
Original mode

Using a Serial Cable Connection

The traditional means of connecting the camera to your computer is by serial
cable. When connecting the camera, it is a good idea to use a KODAK-specified
AC adapter (see page 5) to conserve battery power.

Connecting to a Windows-Based Computer

An RS-232 serial cable is provided so you can connect your camera to a
Windows-based computer.

1 Set the Mode dial to Connect.
2 Plug the appropriate end of the serial

cable into an available 9-pin serial port on
the computer.

MENU

REVIEW

CONNECT

SETUP

CAMERA

CAPTURE