Care and maintenance – Kodak ZE2 User Manual
Page 27
Appendix
www.kodak.com/go/support
19
Contact your computer manufacturer if you have questions.
■
If using this product in an airplane, observe all instructions of the airline.
■
Do not disassemble or expose batteries to liquid, moisture, fire, or extreme
temperature.
■
In the unlikely event that battery fluid leaks inside the product, contact Kodak
customer support.
■
In the unlikely event that battery fluid leaks onto your skin, wash immediately with
water and contact your local health provider. For additional health-related
information, contact your local Kodak customer support.
■
Go
information about the presence of substances
included on the candidate list according to article 59(1) of Regulation (EC) No.
1907/2006 (REACH).
■
For more information, go to
.
Care and maintenance
■
Before inserting or removing the card, make sure your hands, the camera, and the
card are completely dry.
■
If water has entered the camera, allow all components to air-dry for at least 24
hours before using the camera.
■
Do not subject the camera to temperatures lower than 0 (32
°
F) or higher than
40
°
C (104
°
F) for an extended time. Wait until camera reaches operating
temperatures before using.
■
Blow gently on the lens or LCD to remove dust and dirt. Wipe gently with a soft,
lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning solutions
unless designed specifically for camera lenses. Do not allow chemicals, such as
suntan lotion, to contact painted surfaces.
■
Service agreements may be available in your country. Contact a dealer of KODAK
Products for more information.