Safety – Kodak ZE2 User Manual
Page 26
18
www.kodak.com/go/support
Appendix
Power—Built-in rechargeable Li-polymer battery, 450 mAh
Waterproof —IEC 60529 IPX8 up to 3 m (9.8 ft)
Dustproof— IEC 60529 IP6X
Shockproof —MIL-STD-810f shock equivalent 1.5 m (5 ft) onto plywood
IMPORTANT: The shock resistance and water resistance of this product are based on
Kodak test results and do not constitute any guarantee that the product will perform, will
not be damaged, or will not malfunction under such conditions. Though the camera is
designed to withstand the effects of impact occurring during normal use, impact due to
rough handling (such as throwing or dropping it from excessive heights) can cause serious
damage. Even if a drop does not result in functional problems, it can cause scratching and
other cosmetic damage to the camera.
Battery life—Approximately 75 minutes in video recording mode, HDV @ 30 fps
Size—55 x 93.3 x 12 mm (2.2 x 3.7 x 0.5 in.)
Weight—85 g (3.0 oz) with memory card
Operating temperature—0–40
°
C (32–104
°
F); do not expose camera to higher
temperatures.
Safety
CAUTION:
Do not disassemble this product; there are no user-serviceable parts
inside. Refer servicing to qualified service personnel. KODAK AC Adapters
and battery chargers are intended for indoor use only. The use of controls,
adjustments, or procedures other than those specified herein may result in
exposure to shock and/or electrical or mechanical hazards. If the LCD
breaks, do not touch the glass or liquid. Contact Kodak customer support.
■
The use of an accessory that is not recommended by Kodak may cause fire, electric
shock, or injury. For approved accessories, go to
.
■
Use only a USB-certified computer equipped with a current-limiting motherboard.