Inserting an accessory sd or sdhc card – Kodak ZE2 User Manual
Page 12
4
www.kodak.com/go/support
Setting up your camera
Inserting an accessory SD or SDHC Card
Your camera has limited internal memory—perfect for a few practice videos/pictures.
For the best experience, we strongly suggest purchasing a card (SDHC Class 4 or
higher) to store more. (Maximum supported size: 32 GB.)
CAUTION:
A card can only be inserted one way; forcing it may cause damage.
Inserting or removing a card while the camera is on may damage the
video/pictures, the card, or the camera.
IMPORTANT: When you turn on the camera, it checks to see if a card is inserted. If so, new
pictures/videos are stored on the card. If no card is inserted, new pictures/videos are stored
in the camera internal memory. If pictures/videos are detected in internal memory and a
card is inserted, the camera prompts you to move the pictures to the card (and erase those
in internal memory).
Purchase cards
1
Turn off the camera.
2
Insert the card until it clicks.
Accessory
To remove the card, press and
release it, then pull it out.