beautypg.com

Safety precautions, English, Reset button – Kenwood CASSETTE RECEIVER KRC-778RV User Manual

Page 4: Mask key

background image

— 4 —

English

• If you experience problems during

installation, consult your Kenwood dealer.

• If the unit fails to operate properly, press the

RESET button. When the faceplate controls
are not visible, press the left part at the
upper side of the faceplate (as illustrated on
p.8) for as many times as you have preset to
make the faceplate controls appear. The unit
returns to factory settings when the RESET
button is pressed. After you press the reset
button, the Mask Key will be needed to
restart the unit. If the unit still fails to operate
properly after the RESET button has been
pressed, contact your local KENWOOD
dealer for assistance.

• Press the reset button if the CD auto

changer is first controlled and operates
incorrectly. The original operating condition

will return.

• Characters in the LCD may become difficult

to read in temperatures below 41 ˚F (5 ˚C).

NOTE

FM

AM

SRC

CLK

AUD

DISP
NAME.S

TI

VOL ADJ

MTL / M.RDM

D.SCN

REP

B.S / RDM

SCAN

ATT

LOUD

NF

DISC

DISC

DAB

OFF

EJECT

MENU

PROG / PTY

B C NR

Reset button

• The illustrations of the display and the panel

appearing in this manual are examples used
to explain more clearly how the controls are
used. Therefore, what appears on the display
in the illustrations may differ from what
appears on the display on the actual
equipment, and some of the illustrations on
the display may represent something
impossible in actual operation.

• The functions that can be used and the

information that can be displayed will differ
depending on the external disc players being
connected.

Safety precautions

Mask key

If you have transmitted the Mask Key's
signal once to the unit in advance, you will
have to transmit it once again if the unit has
been removed from the battery. This
function helps prevent theft.
When using the unit for the first time:
In order to deactivate the demonstration
mode, be sure to press the transmit button
to transmit the Mask Key's signal.
If this procedure is not carried out, the
control panel of the unit will re-open in two
seconds even with your vehicle's ignition
turned off.

Do not loose the "Mask Key".
If power is disconnected from the unit,
correct operation can only be restored by the
"Mask Key's" signal.
The "Mask Key" will also be required for
service repair.

If you send products in for repair that include
a mask key, make sure to present the unit
together with the mask key.

NOTE

2CAUTION

Dolby noise reduction manufactured under
license from Dolby Laboratories Licensing
Corporation.
”DOLBY” and the double-D symbol are
trademarks of Dolby Laboratories Licensing
Corporation.