Kenwood CASSETTE RECEIVER KRC-778RV - Manual (Page 29)

You can set the defaults for additional functions in the menu
mode.
Make a setting for each function, referring to the following
operations.
Enter the menu mode
Hold down the MENU button for one second or more.
"MENU" is displayed when the menu mode is entered.
The function that you can adjust is indicated with the current
settings displayed.
Selecting function to set
Press the FM button to search through the functions until you
see the one you want to adjust in the display.
Press the AM button to search through the functions
backward.
Example: If you want to switch the setting of the touch sensor
tone function from on to off, first search through the
functions until you see "Beep ON" in the display.
Changing setting for currently displayed function
Press either the 4 or ¢ button.
The setting will change for each function.
Example: The setting of the touch sensor tone will switch from
on to off, and "Beep OFF" is displayed.
Ending the menu mode
Press the MENU button.
Make sure to end the menu mode when finished.
If you fail to end the menu mode, several functions may not
operate properly, including the Traffic Information function and
the Alarm function.
NOTE
4
3
2
1
Menu System
Menu settings
— 29 —
FM
AM
SRC
CLK AUD
DISP
NAME.S MTL / M.RDM D.SCN REP B.S / RDM SCAN
ATT
LOUD
NF
DISC
DISC
DAB
OFF
EJECT
MENU
PROG / PTY
MENU
AM
FM
4 ¢ SRC
38
B C NR TI
VOL ADJ
KRC-PS978R/878R
KRC-778R/778RV
AUTO indicator
NEWS indicator ™ indicator
AUTO indicator
NEWS indicator ™ indicator