Kenwood CASSETTE RECEIVER KRC-778RV - Manual (Page 21)

Switching the Tape display :
Each time you press the DISP button, the display during tape
play switches as follows:
The tape counter is not exact, but only represents an
approximation of the elapsed time.
NOTE
Play side/Tape counter
Date(KRC-PS978R/878R only)
Play side
Play side/Tape running
Tape counter display
CrO
2
(Type II) FeCr (Type III) Metal (Type IV)
Selecting the wrong tape type may cause sound quality to
suffer.
Select type of tape being played.
Switching Tape Types:
Press the MTL button to switch the MTL indicator on and off
and to select the tape type.
Turn the MTL indicator off for normal tape (Type I) playback.
Turn the MTL indicator on for the following tape types:
Switching Tape Types
Listen to tapes recorded using the Dolby B or C NR system.
Turning Dolby NR On/Off:
Press the B-C NR button repeatedly to switch the Dolby NR
selection as follows.
The B NR indicator lights up when Dolby B NR is turned on,
and the C NR indicator when Dolby C NR is turned on.
▼
Dolby B NR ON
▼
Dolby C NR ON (KRC-PS978R Only)
▼
OFF
Using Dolby B/C Noise Reduction
Fast Forwarding Tapes:
Press the FM button.
Rewinding Tapes:
Press the AM button.
Cancelling:
Press the PROG button.
NOR tape play returns.
Fast Forwarding and Rewinding Cassette Tapes
— 21 —