Kenwood DNX7220 - Manual (Page 73)

English 73
If you have pressed the Reset button or if
you have disconnected the Receiver from
battery...
1 Enter the correct security code
You must enter the same security code as that
you have entered in Step 3.
2 Enter the security code
Now, you can use your Receiver.
⁄
• If you enter an incorrect security code, you cannot use
your Receiver for a while.
Incorrect entry count Receiver inoperable time
1 -
2 5 minutes
3 1 hour
4 or more 24 hours
TV Setup
The TV signal receiving areas can be set. (with the
optional accessory TV Tuner connected only)
1 Displaying TV SETUP screen
Touch in the "SETUP
Menu" screen (page 60).
2 Setting up TV
1
2
3
1 Moves to "TV2 Area Set" screen.
2 Sets the present TV1 receiving area.
3 Returns to the "SETUP Menu" screen.
4
5
6
4 Returns to the "TV1 Area Set" screen.
5 Sets the present TV2 receiving area.
6 Returns to the "SETUP Menu" screen.