Kenwood DNX7220 - Manual (Page 70)

70 DNX7220
Clock Setup
You can adjust the clock time.
1 Display the Clock Setup screen
Touch in the "SETUP
Menu" screen (page 60).
2 Setup the Clock
2
2
3
4
3
1
5
6
1 Clock time display
2 Adjusts hours.
3 Adjusts minutes.
4 Sets "00" minute.
Setup examples: 3:00 – 3:29 \ 3:00
3:30 – 3:59 \ 4:00
5 Sets the clock time in synchronization with
the time data sent from the navigation
system or the RDS station. (
"Navigatoin")
When the synchronized mode is set, the
clock cannot be adjusted manually.
6 Returns to the "SETUP Menu" screen.
3 Adjust the clock time
Setup Menu
Monitor Setup
You can adjust the position, picture quality and
the screen mode of the monitor.
1 Displaying the Monitor SETUP screen
Touch in the "SETUP
Menu" screen (page 60).
2 Setup each item
1
2
3
4
5 6
1 Moves to "Tilt Control" screen.
2 Brightness control
3 Contrast Control
4 Black Level Adjustment
5 Dimmer Mode Setup
"ON": The display dims.
"OFF": The display doesn’t dim.
"SYNC": Turning the Dimmer function
On or Off when the vehicle light
control switch is turned On or Off.
"NAVI SYNC":
Turning the Dimmer function On
or Off according to the Navigation
Day/Night display setting.
6 Returns to the "SETUP Menu" screen.
⁄
• In this Screen Control screen, you can perform setups for
the menu screen. Setups for videos such as DVD can be
performed on the (page 48).
7
11
8
9
10
7 Returns to the "Screen Control" screen.
8 Moves to "Mode Select 1" screen.
9 Sets the Monitor angle.