Kenwood DPF-2030 - Manual (Page 16)

16
Repeated playback
To repeat only the programmed tracks
: Keys and control used in the operations described on this page.
™
Preparation
To cancel repeated playback
Press the REPEAT key again.
Lights up.
1
Press so that the "PGM" indicator lights.
2 Select the desired track No.
5 Switch REPEAT ON.
6
Start playback.
4
Repeat steps 2 and 3 above.
Go to step 3 within 5 seconds.
3
Set the entry.
÷ All of the programmed tracks will be repeated.
÷ In case only one track is programmed, only that track will be repeated.
÷ Up to 20 tracks can be programmed. When “
FULL ” is displayed, no
more tracks can be programmed.
Lights up.
Goes off.
Do this operation in the stop mode.
÷ Load a disc in the CD player. @
0 7 6
4 ¢
1 ¡
0
0
0
0
0
REPEAT
6
REPEAT
P.MODE
P.MODE
TRACK
NO. PGM
REPEAT
0 1
TRACK
NO. PGM
0 1
TRACK
TRACK
NO. PGM
REPEAT
0 1
Press the numeric keys as
shown below....
To enter track No. 15:
05
1 2 3
4 5 6
7 8 9
0 +10
4 ¢
Main unit
(Except for DPF-2030)
Remote control unit
(Except for DPF-1030)
The figure shows an example for the DPF-2030