Kenwood DPF-2030 - Manual (Page 12)

12
Normal play (TRACK mode)
2
Load a disc.
3
Start playback.
1 Open the tray.
Use the following procedure to play a CD in the original order
of tracks from track No. 1.
: Keys and control used in the operations described on this page.
3
Close the tray.
Playing tracks in order from track No. 1
÷ Playback starts when a disc has been loaded.
To pause playback
2
Place a disc.
Disc tray
Press the POWER switch to ON.
Label side
÷ After a few seconds, play starts from the track No. 1.
Elapsed time of track being played
Track NO. being played
1
Lights up.
÷ Each press pauses and plays the CD alternately.
To stop playback
÷ Do not touch the played side of disc.
÷ Loading two discs together will cause malfunctioning.
÷ Place the disc properly along the groove on the tray. (If the disc is not
placed horizontally, malfunction will result.)
÷ A single CD (8 cm disc) can also be played.
÷ Ordinary CD single (8 cm) disc adapters sold in audio stores cannot be
used with this unit.
Lights up.
The track Nos. recorded on the CD are displayed.
TRACK
0 7 6
4 ¢
1 ¡
0
0
0
0
0 0
7 6
6
OPEN/CLOSE
0
OPEN/CLOSE
0
POWER
- ON – OFF
TRACK
TRACK
NO.
SINGLE TIME
6
1
7
2
8
3
9
4
10
5
0
:
1
0 0 5
TRACK
TRACK
NO.
SINGLE TIME
6
1
7
2
8
3
9
4
10
5
0
:
1
0 0 0
The figure shows an example for the DPF-2030
0
7 6 4 ¢ 1 ¡