Kenwood DPC-X937 - Manual (Page 35)

35
DEUTSCH
IT
ALIANO
ESP
AÑOL
The mode changes each time the 4 or 3/¢ key is pressed.
1 "S.G. HI" : (96 seconds)
Up to 96 seconds of music data is stored in the
memory.
2 "S.G. Lo" : (24 seconds)*
Up to 24 seconds of music data is stored in the
memory.
* There is no data compression, so that listening with
high sound quality is possible.
The SHOCK GUARD function is activated ("S.G.
HI"(48 seconds)) permanently with the DPC-X637/
DPC-X537.
Sound skip guard function (SHOCK GUARD)
(DPC-X937 only) (only by remote control operation)
The SHOCK GUARD function incorporated in the unit stores music data in memory so that, even when the signals from the
optical pickup is interrupted due to an external impact, playback of music can be continued without interruption. "Wide
CAPTURE" uses a method strong in regard to vibrations in the rotation direction in addition to the conventional SHOCK
GUARD function, so that the sound skip guard function is made even stronger. Press during playback or stop status.
1
Press the MENU key repeatedly until " " is displayed.
2
Press the 4 key or 3/¢ key.
÷ The SHOCK GUARD function cannot be used
when the digital output jack of the unit is con-
nected to another audio component.
÷ When the SHOCK GUARD function is set to
"S.G. Lo", continuous playback cannot be en-
gaged. (Page 37)
*5378_25_38EN 03.7.3, 2:19 PM 35