Using the external battery case – Kenwood DPC-X937 User Manual
Page 14
14
DEUTSCH
IT
ALIANO
ESP
AÑOL
Using the external battery case
(DPC-X937 only)
1
Attach the
external battery
case to the
main unit
÷ When attaching the external battery case to the main
unit, be sure to align the orientation of the plug be-
fore inserting it. (See the figure.)
÷ Rechargeable batteries inside the unit cannot be
charged while the external battery case is attached.
2
Open the batteries
cover.
3
Insert 2 alkaline
batteries and close the
cover.
÷ Make sure the positive ª
and negative
· poles are
properly aligned.
÷ Use two commercially sold AA alkaline batteries with the
external battery case.The unit may not operate normally if
manganese batteries are used.
÷ When carrying the external battery case without attach-
ing it to the main unit, remove the batteries from the
case. If the case containing batteries is put in a pocket or
bag together with a metallic object such as a key holder,
the + and - terminals of the battery case may be shorted
due to contact with the metallic object.
÷ The battery case can be used simultaneously with the
batteries inside the unit to extend the overall playback
time.
To EXT BATT jack
2
1
*5378_08_15EN
03.7.3, 2:11 PM
14