Kenwood DPC-X937 - Manual (Page 15)

15
DEUTSCH
IT
ALIANO
ESP
AÑOL
Connections
Ensure that the power of all components is off before connecting the cords.
Cords are sold separately.
Digital signal connection: (DPC-X937 only)
Analog signal connection:
Make sure to switch Bass Boost off.
Listening through
speakers:
Speakers with
built-in amplifier
Amplifer
MD recorder etc.
÷ Connect this unit to an audio component having a digital
input, such as an MD recorder etc.
÷ Adjust the listening volume on the connected audio com-
ponent.
÷ This connection may be impossible with some amplifiers.
÷ When the digital connection is present, the (Head-
phones/ Remote control unit) jack of the unit does not out-
put audio signal.
÷ Connect the cable to the amplifier's CD input jacks.
÷ The LINE OUT volume can be adjusted using the main
unit's VOLUME +/- keys as well as using the remote's
VOLUME +/- keys. The level recommends 20.
÷ This connection may be impossible with some amplifiers.
Connection with other components:
Listening through car stereo:
÷ Connect this unit with a commercially available car audio
cassette adapter and insert it into the car audio as
shown. For details connection method, read the instruc-
tion manual for the car audio cassette adapter.
Car Stereo
Insert into cassette deck slot
Car cassette adaptor
(Commercially available)
DPC-X937 only
DPC-X937
only
*5378_08_15EN 03.7.3, 2:11 PM 15