Kyocera COMMAND CENTER Multifunctional Printer - Manual (Page 53)

COMMAND CENTER Pages
Operation Guide 49
Lifetime
Measure-
ment Specifies whether the lifetime is measured by time or by time
and data size.
Lifetime
(Time)/
Lifetime
(Data
Size) Specifies the lifetime of an IPSec SA. Lifetime Measurement
allows you to select whether to use time or data size to specify
the lifetime. When you select Time & Data Size, an SA is
disabled and updated when either the time or data size of the
SA exceeds the specified value.
IP Version
Specifies the IP version of the other end. Select IPv4 or IPv6.
IP
Address
(IPv4) Specifies the IPv4 addresses of the hosts or network with
which the print system is connecting via IPSec. When you are
restricting the scope of IPSec, be sure to specify the IP
addresses. If this field is blank, all IPv4 addresses will be
allowed to connect the print system.
IP
Address
(IPv6) Specifies the IPv6 addresses of the hosts or network with
which the print system is connecting via IPSec. When you are
restricting the scope of IPSec, be sure to specify the IP
addresses. If this field is blank, all IPv6 addresses will be
allowed to connect the print system.
Subnet
Mask When IPv4 is selected for IP Version, this specifies the
subnet mask of the hosts or network with which the print
system is connecting via IPSec. If this field is blank, the
specified addresses are considered to be host addresses.
Prefix
Length When IPv6 is selected for IP Version, this specifies the prefix
length of the hosts or network with which the print system is
connecting via IPSec. If this field is blank, the specified
addresses are considered to be host addresses.
Item Description