Kenwood KDC-U6046L - Manual (Page 8)

8 | KDC-U7046BT/ KDC-U7046BTL/ KDC-U6046/ KDC-U6046L
Audio Preset Recall
Recalling the sound setup registered by Preset Memory> (page 8).
1 Select the source
Press the [SRC] button.
For how to select source item, refer to source selection> (page 5).
2 Enter Audio Control mode
KDC-U6046 KDC-U6046L
Press the [AUDIO] button.
KDC-U7046BT KDC-U7046BTL
1) Press the [FNC] button.
2) Turn the Control knob to select “Audio
Control”, and then press the [ENTER] button.
3 Select Audio preset memory mode
The item can be selected and determined as
follows.
“Detailed Settings”
➜ “Audio Preset”
To select the item, turn the Control knob. To
determine the item, press the [ENTER] button.
4 Select the Audio Preset Recall
Turn the Control knob to select “Recall”, and
then press the [ENTER] button.
5 Turn the Control knob to select “YES”, and then
press the [ENTER] button.
“Recall Completed” is displayed.
6 Exit Audio Control mode
Press the [ ] button for at least 1 second.
Audio Preset Memory
Registering the value setup by Audio Control.
1 Setup Audio Control
Setup the (page 7).
2 Enter Audio Control mode
KDC-U6046 KDC-U6046L
Press the [AUDIO] button.
KDC-U7046BT KDC-U7046BTL
1) Press the [FNC] button.
2) Turn the Control knob to select “Audio
Control”, and then press the [ENTER] button.
3 Select Audio preset memory mode
The item can be selected and determined as
follows.
“Detailed Settings”
➜ “Audio Preset”
To select the item, turn the Control knob. To
determine the item, press the [ENTER] button.
4 Select the Audio Preset Memory
Turn the Control knob to select “Memory”, and
then press the [ENTER] button.
5 Turn the Control knob to select “YES”, and then
press the [ENTER] button.
“Memory Completed” is displayed.
6 Exit Audio Control mode
Press the [ ] button for at least 1 second.
⁄
• To use this function, this unit must be powered for more
than one hour.
• Register 1 pair of Audio Preset Memory. You cannot register
by the source.
• When you press the Reset, all the sources will be the setting
value which is registered.
• The following items can be registered.
“Bass Center FRQ”, “Bass Level”, “Bass Q Factor”, “Bass EXT”,
“Middle Center FRQ”, “Middle Level”, “Middle Q Factor”,
“Treble Center FRQ”, “Treble Level”, “SubWoofer Level”, “HPF
Front”, “HPF Rear”, “LPF SubWoofer”, “Subwoofer Phase”
Audio Adjustments