Kenwood KDC-U6046L - Manual (Page 28)

28 | KDC-U7046BT/ KDC-U7046BTL/ KDC-U6046/ KDC-U6046L
Bluetooth Setup
Function of KDC-U7046BT/ KDC-U7046BTL/ KCA-BT200 (Optional Accessory)
Selecting the Bluetooth device You
Wish to Connect
When two or more Bluetooth devices have already
been registered, you need to select the Bluetooth
device you wish to use.
1 Enter Bluetooth mode
KDC-U7046BT KDC-U7046BTL
Press the [ ] button.
KDC-U6046 KDC-U6046L
Press the [FNC] button for at least 1 second.
“BT MODE” is displayed.
2 Enter Function setting mode
Press the [FNC] button.
3 Select Bluetooth device selection mode
The item can be selected and determined as
follows.
”Settings”
➜ “Phone Selection” (to select the
cellphone) or “Audio Selection” (to select the
audio player)
To select the item, turn the Control knob. To
determine the item, press the [ENTER] button.
“(name)” is displayed.
4 Select the Bluetooth device
Turn the Control knob.
5 Set up the Bluetooth device
Press the [ENTER] button.
‘
✱(name)’ or ‘-(name)’ is displayed.
“ ✱”: The selected Bluetooth device is busy.
“-”: The selected Bluetooth device is on standby.
“ “ (blank): The Bluetooth device is deselected.
6 Exit Bluetooth mode
Press the [SRC] button.
⁄
• If a cell-phone is already selected, deselect it, and then
select a different one.
• If you cannot select a device using the audio player,
connect the device with the audio player.
Deleting a Registered Bluetooth
device
You can delete a registered Bluetooth device.
1 Enter Bluetooth mode
KDC-U7046BT KDC-U7046BTL
Press the [ ] button.
KDC-U6046 KDC-U6046L
Press the [FNC] button for at least 1 second.
“BT MODE” is displayed.
2 Enter Function setting mode
Press the [FNC] button.
3 Select Bluetooth device deletion mode
The item can be selected and determined as
follows.
”Settings”
➜ “Detailed Settings” ➜ “Device
Delete”
To select the item, turn the Control knob. To
determine the item, press the [ENTER] button.
Device name is displayed.
4 Delete the selected Bluetooth device
Turn the Control knob to select desired device
name, and then press the [ENTER] button.
5 Turn the Control knob to select “YES”, and then
press the [ENTER] button.
“Completed” is displayed.
6 Exit Bluetooth mode
Press the [SRC] button.
⁄
• When a registered cell-phone is deleted, its Phone Book,
log, SMS, and voice tag are also deleted.