Other features, English – Kenwood KDC-PS909 User Manual

Page 30

Hold down the DISP button for three seconds or more.
The security code will be set.
"RE-ENTER" will appear in the display for one second, asking
you to enter the code once again for confirmation. When
"CODE" appears in the display, you can start inputting the
code.

Press the Preset button and input the security code again.

Hold down the DISP button again for three seconds or more.
"APPROVED" will appear in the display, with the code security
function turning on. From this point on, if the unit is
disconnected from the battery, the security code must be
entered the first time that the unit's power is turned on.
"ENTER" and "CODE" will appear in the display, asking you to
input the code.

If you input an incorrect security code, the display ask you once
more to input the correct one. Follow the procedure in step 7
above.

If you press the RESET button or remove the battery:

The first time you turn the unit on again, "CODE" will appear in
the display, asking you to input the security code.
Repeat steps 7 and 8 above, and input the security code.
You can start operating the unit again when "APPROVED"
appears in the display.
If you enter the incorrect code, the power will turn off. Enter
the correct code to turn the unit on.

NOTE

— 30 —

English

Other features

(See page 8)

Code Security Function

When the battery is removed from the unit’s power switch,
you cannot turn on the unit again unless the preset security
code is input. This function helps prevent theft.

You must follow steps 1 to 8 to be able to use the Code Security
function. Turning off the power during the procedure will
deactivate the security code setting.
Once the code security function has been activated, "SECURITY"
disappears from the MENU system. Note that it will no longer be
possible to cancel this function afterwards.

Select the four digits to use in your security code.

The four-digit security code is very important, as you will need it
to turn the unit on again when the code security function is on.
Choose the number carefully and do not forget it (write it down
and keep it separately in a safe place).

Hold down the MENU button for one second or more.
"MENU" is displayed and the menu mode is turned on.

Press the

¢ button repeatedly until "SECURITY" appears in

the display.
Press the

4 button to search in the other direction.

Hold down either the AM or FM button for two seconds or
more.
"ENTER" will appear in the display for one second, indicating
the code setting mode has been entered. When "CODE"
appears in the display, you can start inputting the code.

Press the preset button and enter the security code that you
have selected in step 1.
Example: Use “3510” as the security code.

NOTE

Step

Button to press

# Times
pressed

Display

“3”

“5”

“1”

“0”