Kenwood KDC-PS909 - Manual (Page 25)

— 25 —
Other features
(See page 8)
Audio Control Setting
Adjust various parameters of sound quality.
Press the AUD button to enter the control mode.
Press either the FM or AM button.
Each time the button is pressed, the adjustment mode will
change as follows:
Pressing the FM button advances the display, and pressing the
AM button reverses it.
•
When preout is switched to unbalanced
• When preout is switched to balanced
Source tone memory
Each source (CD, FM, AM, and disc changer) has its own
memory in which to store the bass and treble tone settings.
The settings made for a particular source are then recalled
automatically whenever you use that source (e.g., FM mode uses
the tone settings made for FM, AM for AM, etc.).
Press the 4/¢ button.
Look at the table (See page 26) to adjust the mode being
displayed.
Press the AUD button to end the control mode.
4
3
NOTE
2
1
▼
Bass Sub-preout
level
▼ ▲
Treble Balance
▲
Only when monaural output is
set to on ( )
Only when Non-fading output is
set to on ( )
When the name appears for the disc you want to play
Press the OK button.
The disc whose name is displayed will be recalled, and the disc
name preset play (DNPP) mode will end.
To cancel DNPP mode:
Press the DNPP button.
The disc name preset play (DNPP) mode will be cancelled.
2
▼
Bass N-F
Level
▼ ▲
Treble Fader
▼ ▲
Balance