Kenwood MDX-G2 - Manual (Page 7)

7 EN
Preparation
section
Main unit only
1
Press the ON/STANDBY key
to switch the power on.
2
Press and hold the MENU key
for more than 2 seconds.
3
Press the VOLUME/MULTI CON-
TROL keys to select the hour fig-
ure.
Example : Adjustment to 8:07am
12 o'clock during the day is displayed
as “12:00pm” and 12 o'clock midnight
is displayed as “12:00am”.
4
Press the SET/TUNING MODE
key.
5
Press the VOLUME/MULTI CON-
TROL keys to input the figure of
minute.
6
Press the SET/TUNING MODE
key.
To check the time of day :
Press the &STOP key while the unit is in
the STANDBY mode (page 59).
÷ After a power failure, when the power cord
is unplugged and plugged again or when the
STANDBY/TIMER indicator blinks in green,
the current time should be adjusted again.
÷ In step 6, accurate time adjustment is pos-
sible by pressing the SET/TUNING MODE
key at the same time as a time announce-
ment indicating the 00 second of the minute.
Adjusting the current time
To use the timer function, it is required to
set the built-in clock of the unit to the cor-
rect time. The clock shows the time of day
in 12-hour system.
SP
EX. BASS
AUTO TUNED
SP
EX. BASS
AUTO TUNED
SP
EX. BASS
AUTO TUNED
SP
EX. BASS
AUTO TUNED
TUNED AUTO
PROG.
SP
EX. BASS
TUNER FM/AM
STOP
MD CD
MENU SOUND
MD REC BEST HITS AUX
VOLUME/MULTI CONTROL
SET TUNING
MODE
/ TUNING 4 TUNING/ ¢
System
PUSH OPEN
MD PERSONAL STEREO SYSTEM
STANDBY /TIMER
DISC LOADING MECHANISM
ON/STANDBY EJECT
ONE
RANDOM
PGM
REPEAT
TRACK NO. SLEEP DISC O.T.T. PROG. TOTAL O.T.E. HIGH-SPEED AUTO TUNED SP REC LP BEST HITS
EX. BASS MD-EDIT
LOUD kHz
MHz
MD MD CD CD
2
1
3 5
, ,
4 6 & STOP
*5052/04-09/EN 5/29/01, 10:28 AM 7