Resetting the microcomputer, Transporting the unit – Kenwood XD-A75 XD-A55 User Manual
Page 28
28
EN
RESETTING THE MICROCOMPUTER
Reset the microcomputer under the following con-
ditions :
•
To erase all of the stored memory contents (clock
and timer settings, and tuner and CD presets).
•
If the display is not correct.
•
If the operation is not correct.
1
Press the POWER / ON/STANDBY button to en-
ter the standby mode.
2
Whilst pressing down the
7 STOP button and
the SOUND MODE button, hold down the
POWER / ON/STANDBY button for at least 1
second.
•
“CLEAR AL” will appear.
Caution :
•
The operation explained above will erase all data
stored in memory including clock and timer set-
tings, and tuner and CD presets.
TRANSPORTING THE UNIT
Before you move this product to a new location,
proceed as follows :
1
Press the POWER / ON/STANDBY button to turn
the power on.
2
Press the CD button.
3
Press the
0 OPEN/CLOSE button to open the
disc tray.
•
Remove all CDs inserted in the unit.
4
Press the
0 OPEN/CLOSE button to close the
disc tray.
•
Make sure that “NO DISC” is displayed.
5
Press the POWER / ON/STANDBY button to
enter the standby mode and then unplug the AC
power cord from the AC socket.
SOUND
MODE
POWER
ON/STANDBY
7 STOP
POWER
ON/STANDBY
CD
0 OPEN/CLOSE