F. advanced troubleshooting – Kodak NOVAJET 750 User Manual
Page 16
NJ750 Training Guide
16
F. Advanced Troubleshooting
1.
Skewing of the output image is normally a dirty or defective encoder
strip/sensor. Clean encoder strip thoroughly top and bottom using Windex
or NovaKlean solution. Clean encoder sensor by spraying Windex directly
onto sensor; blow dry with canned air – refer to NJ1000i Technical Bulletin
5. Replace encoder strip (service required) if problem cannot be corrected.
2.
Missing data in an image is typically a print server or network traffic
problem. Increase data port rate or reconfigure print server.
3.
Multiple lines throughout a print typically indicates a problem with the
connectivity to the printer. Ensure only an IEEE compliant parallel printer
cable (if used) and/or switchbox are used. One protruding line or an area
showing over spray is typically a RIP problem and not necessarily a
connectivity issue.
- Printer (67 pages)
- DryView 8900 (144 pages)
- ENDURA CIS-241 (2 pages)
- DS3700 (2 pages)
- NOVAJET 630 (192 pages)
- EasyShare 5500 (122 pages)
- CIS-201 (12 pages)
- ESP 5 (81 pages)
- ESP 5 (24 pages)
- ESP 5 (79 pages)
- ESP 5 (16 pages)
- FC2 (10 pages)
- CS300C (2 pages)
- EasyShare 5100 (86 pages)
- 3000 (36 pages)
- ESP 3.2s (123 pages)
- M700 (2 pages)
- ESP7200 (6 pages)
- CIS-221 (2 pages)
- 6B6640 (84 pages)
- 6000 (76 pages)
- 6000 (2 pages)
- ESP 3.2 (31 pages)
- ESP 1.2 (100 pages)
- ESP 1.2 (2 pages)
- ESP C315 (95 pages)
- ESP C315 (2 pages)
- ESP Office 2150 (7 pages)
- ESP C315 (20 pages)
- HERO 3.1 (34 pages)
- HERO 3.1 (100 pages)
- ESP 7250 (2 pages)
- 8800 (26 pages)
- ESP 9 (143 pages)
- ESP 9 (16 pages)
- E-4028 (8 pages)
- CP-48S (12 pages)
- 5300 (28 pages)
- RP 30 (235 pages)
- 5100 (28 pages)
- 5100 (80 pages)
- E-2411 (6 pages)
- ESP 5260 (62 pages)
- PROFESSIONAL ULTRA III Paper E-142 (8 pages)
- ESP Office 6150 (20 pages)