Konica Minolta MM-A208 - Manual (Page 84)

84
IMAGE SIZE
Changing image size affects the number of pixels in each image. The greater the image size, the
larger the file size. Choose image size based on the final use of the image – smaller images will be
more suitable for web sites whereas larger sizes will produce higher quality prints.
Image size must be set before the picture is taken. Changes made to image size are displayed on
the data panel, EVF, and LCD monitor. Image size must be reset manually. See navigating the
recording-mode menu on page 80.
EVF and
LCD monitor
2560
1600
1280
640
Number of pixels
(hor. X vert.)
2560 X 1920
1600 X 1200
1280 X 960
640 X 480
Image size
FULL
UXGA
SXGA
VGA
The frame counter indicates the approximate number of images that can be stored on the memory
card at the camera’s image quality and size settings. If the settings are changed, the frame counter
adjusts accordingly. Because the calculation is based on average file sizes, the actual image may not
change the counter or may decrease it by more than one.
ABOUT THE FRAME COUNTER
R ECORDING MODE MENU
Data panel