Kodak Digital Science DC120 - Manual (Page 38)

2-28
General Maintenance and Safety
✔ To keep from damaging your DC120, avoid exposing it to moisture and
extreme temperatures.
✔
Clean the outside of the DC120 by wiping it with a clean, dry cloth. Never
use harsh or abrasive cleaners or organic solvents on the camera or any of
its parts.
✔
Never disassemble or touch the inside of the DC120. This could result in
electrical shock.
✔
If you notice smoke or a strange smell coming from the DC120,
immediately turn the camera off, wait a few minutes until the DC120
cools, then remove the batteries.
Cleaning the Lens
1 Blow gently on the lens to remove dust and dirt.
2 Moisten the lens by breathing lightly on it.
3 Wipe the lens gently with a soft, lint-free cloth or an untreated lens-cleaning
tissue.
☞
Do not use cleaning solutions unless they are designed specifically for
camera lenses. Do not wipe the camera lens with chemically treated
eyeglass lens tissue as it may scratch the lens.