Kodak Digital Science DC120 - Manual (Page 98)

9-4
DC120 Camera
Problem Cause Solution
Ready light does not turn on
and the camera does not work. Batteries are low or
empty. Replace the batteries.
Pictures remain in the
camera’s memory
when the battery is
removed.
Camera is not turned
on. Turn the camera on
and verify that the
green Ready light
turns on.
Shutter button does not work. Camera is not turned
on. Turn the camera on
and verify that the
green Ready light
turns on.
Ready light is
blinking. Camera is
processing picture. Wait until Ready light
stops blinking before
attempting to take
another picture.
The Status Display
reads FUL. The
camera memory or
optional Picture Card
is full. Transfer pictures to
your computer and
erase them from the
camera’s memory.
Camera is connected
to the computer. Disconnect camera
from computer.
Camera does not turn on. Batteries are not
properly installed. Remove the batteries
and install them
according to the
directions on the
outside of the battery
door.
Part of the picture is missing. Something was
blocking the lens
when the picture was
taken. Keep hands, fingers,
or other objects away
from the lens when
taking pictures.
Your eye or the picture
was not centered
correctly in the
viewfinder Leave space around
subject when
centering picture in
viewfinder.