Kodak Digital Science DC120 - Manual (Page 31)

2-21
2
Using Camera
Erasing Pictures from the DC120 or Kodak Picture Card
The ERASE display allows you to erase individual or all pictures from the
DC120’s memory or the optional Kodak Picture Card.
☞
The camera does not have to be turned on to use the PLAY-STOP option.
You cannot take a picture when PLAY-STOP is on.
If erasing the entire camera or card, a display appears asking you to verify that all
the pictures should be erased. Press the SELECT button until the appropriate
response is highlighted, then press the ENTER button.
To Exit: Press the SELECT button until the EXIT option is highlighted and then
press the ENTER button.To return to a picture display screen, press the VIEW
button.
1 Press the PLAY-STOP switch.
The LCD displays the last picture taken.
2 Press the MOVE-ERASE button.
The MOVE-ERASE display appears with
CHANGE ALBUM highlighted.
3 Press the SELECT button until ERASE is
highlighted.
4 Press the ENTER button.
A display appears with ERASE
PICTURE highlighted.
5 Press the SELECT button until the
correct erase option is highlighted,
6 Press the ENTER button.
☞
If necessary, press the TelePhoto or
Wide Angle buttons until the correct
picture appears in the bottom right-
hand corner.
The ERASING PICTURE display
appears while the picture is erased.
Empty albums are also erased.
PLA
Y • ST
OP
TAB SELECT ENTER VIEW INFO MOVE • ERASE
1
PLA
Y • ST
OP
TAB SELECT ENTER
VIEW INFO MOVE • ERASE
MOVE PICTURE
MOVE ALL
EXIT
12
MOVE TO CARD
CHANGE ALBUM
EXIT
ERASE
PLA
Y • ST
OP
TAB SELECT ENTER
VIEW INFO MOVE • ERASE
ERASE CARD
MOVE PICTURE
MOVE ALL
EXIT
12
ERASE PICTURE
ERASE CAMERA
EXIT