Kenwood KDC-507 EN User Manual
Page 27
Sets the tuning mode.
Tuning mode
Display
Operation
Auto seek
"Auto 1"/
Automatic search for a station.
"AUTO 1"
Preset station seek
"Auto 2"/
Search in order of the stations
"AUTO 2"
in the Preset memory.
Manual
"Manual"/
Normal manual tuning control.
"MANUAL"
Tuning Mode
Only stations whose reception is good are searched for in auto
seek tuning.
Display
Setting
"Local.S OFF"/ "LO.S OFF"
The local seek function is OFF.
"Local.S ON"/ "LO.S ON"
The local seek function is ON.
Local Seek
When it's ON, the "NEWS" indicator is ON.
When the news bulletin starts, "NEWS" is displayed, and it
switches to the news bulletin.
• If you choose the "20MIN"/ "20M" setting, further news bulletins
will not be received for 20 minutes once the first news bulletin is
received.
• The news bulletin volume is the same level that was set for
• This function is only available if the desired station sends PTY-code
for news bulletin or belongs to
Network sending PTY-code for news bulletin.
• When the News Bulletin Interrupt function is ON, it switches to an
FM station.
It switches automatically when a news bulletin starts even if the
radio isn't being listened to. Also, the time interval when
interrupt is prohibited can be set.
Display and Setting
"NEWS OFF"
"NEWS 00MIN"/ "NEWS 00M"
"NEWS 90MIN"/ "NEWS 90M"
When "NEWS 00MIN"/ "NEWS 00M" — "NEWS 90MIN"/ "NEWS
90M" is set, the News Bulletin Interrupt function is ON.
…
News Bulletin with Timeout Setting
Function of the KDC-M6024G/KDC-M6024/KDC-V6524/KDC-6024
Switching the preout between the rear and non-fading. (In non-
fading it outputs without effect from the fader control.)
Display
Setting
"SWPRE Rear"
Rear preout.
"SWPRE N-Fad"
Non-fading preout.
Switching preout
Function of the KDC-M6024G/KDC-M6024/KDC-V6524/KDC-6024
Dimming this unit's display automatically when the vehicle light
switch is turned ON.
Display
Setting
"Dimmer ON"
The display dims.
"Dimmer OFF"
The display doesn't dim.
Dimmer
— 27 —
KDC-M6024G_U.S r4 02.11.8 9:22 AM Page 27