Kenwood KDC-507 EN - Manual (Page 26)

Adjusting the display contrast.
Display and Setting
"Contrast 0"/ "CONT 0"
"Contrast 10"/ "CONT 7"
…
Contrast Adjustment
Button Color
[1] Silky White
[2] Red
[3] Blue
[4] Blue Green
Selecting the Color mode
Press the [6] button.
Each time the button is pressed the Color mode switches as
shown below.
Display Color mode
"Scan" The color changes in sequence.
"SRC" The color changes according to the selected source.
"Time" The color changes every 6 hours.
Keeps the presently set color.
Blue fine adjustment
1 Press the [3] button for at least 2 seconds.
2 Press the [
4] or [¢] button.
When the blue fine adjustment is completed, press the [3]
button.
Function of the KDC-V6524
You can set the display to a desired color.
1 Select Illumination Color Setting Mode
Press the [FM] or [AM] button.
Select the "COL" display.
2 The color continues to change gradually
Hold down on the [
4] or [¢] button.
Release your finger at the color you want.
Colors adjusted using either [ 4] or [¢] will be stored
automatically, and they can be called by pressing [5] button.
Quick call up the preset color
Press the desired [1] — [4] button.
Illumination Color Setting
Setting the Display type.
Display Setting
"Display C"/ "DISP C" Demonstration.
"Display A"/ "DISP A" Normal display type.
"Display B"/ "DISP B" Silent display type.
Switching Display Type
Selecting the button illumination color as green or red.
Display Setting
"Button Red"/ "KEY RED" The illumination color is red.
"Button Green"/ "KEY GRN" The illumination color is green.
Selectable Illumination
Menu system
— 26 —
English
KDC-M6024G_U.S_r4_01 02.11.15 11:27 AM Page 26