Kenwood KDC-MP858 - Manual (Page 29)

English | 29
ANT.
CONT
TEL MUTE
P.CONT
FRONT • L
FRONT • R
REAR • L
REAR • R
– +
Connecting Wires to Terminals
Dimmer control wire (Orange / White)
To car light control switch
AUX right input (Red)
External amplifier control wire (Pink / Black)
To "EXT.AMP.CONT." terminal of the amplifier having
the external amp control function.
FM/AM antenna input
Rear left output (White) /
Sub Woofer left output (White)
Fuse (10A)
Wiring harness
(Accessory
1)
Ignition wire (Red)
Battery wire (Yellow)
Ground wire (Black) - (To car chassis)
ACC
Car fuse box
If no connections are made, do not let the wire come out from the tab.
Front left output (White)
Front right output (Red)
To connect the Disc changer,
consult your Disc changer manual.
KENWOOD disc changer input
When using the optional power amplifier, connect to
its power control terminal. Power control wire (Blue/White)
Motor antenna control wire (Blue)
Depending on what antenna you are using, connect
either to the control terminal of the motor antenna,
or to the power terminal for the booster amplifier of
the film-type antenna.
To front left speaker
To front right speaker
To rear left speaker
To rear right speaker
White/Black
White
Gray/Black
Gray
Green/Black
Green
Purple/Black
Purple
Ignition key switch
Car fuse box
(Main fuse)
Battery
TEL mute wire (Brown) Connect to the terminal that is grounded when either
the telephone rings or during conversation.
Rear right output (Red) /
Sub Woofer right output (Red)
AUX left input (White)