beautypg.com

Kenwood KDC-MP858 User Manual

Page 23

background image

English

|

23

DSI (Disabled System Indicator)

A red indicator will blink on the unit after the
faceplate is removed, warning potential thieves.

Display

Setting

"DSI ON"

LED flashes.

"DSI OFF"

LED OFF.

Manual Clock Adjustment

1

Select Clock Adjustment mode

Press the [FM] or [AM] button.
Select the "Clock ADJ" display.

2

Enter Clock Adjust mode

Press the [

4] or [¢] button for at least 1

second.
The clock display blinks.

3

Adjust the hours

Press the [FM] or [AM] button.

Adjust the minutes

Press the [

4] or [¢] button.

4

Exit Clock adjustment mode

Press the [MENU] button.

Touch Sensor Tone

Setting the operation check sound (beep sound)
ON/OFF.

Display

Setting

"Beep ON"

Beep is heard.

"Beep OFF"

Beep canceled.

1

Enter Standby

Press the [SRC] button.
Select the "STANDBY" display.

2

Enter Menu mode

Press the [MENU] button for at least 1 second.
When "Menu" is displayed, "Security" is displayed.

3

Enter Security Code mode

Press the [

4] or [¢] button for at least 1

second.
When "Enter" is displayed, "CODE" is displayed.

4

Select the digits to enter

Press the [

4] or [¢] button.

5

Select the Security Code numbers

Press the [FM] or [AM] button.

6

Repeat steps 4 and 5, and complete the

Security Code.

7

Confirm the Security Code

Press the [

¢] button for at least 3 seconds.

When "Re-Enter" is displayed, "CODE" is displayed.

8

Do the step 4 through 7 step operation, and

reenter the security code.
"Approved" is displayed.
The Security Code function activates.

• If you enter a Code different from your Security Code,

you have to start over from step 4.

Press the Reset button and when it’s removed
from the battery power source

1

Turn the power ON.

2

Do the step 4 through 7 step operation, and

reenter the security code.
"Approved" is displayed.
The unit can be used.

• If an incorrect code is input, "Waiting" is displayed, and

the input prohibited time shown below is generated.
After the input prohibited time lapses, "CODE" is
displayed, and input can be done.

Number of times the
incorrect code was input

Input prohibited time

1

2

5 minutes

3

1 hour

4

24 hours

This manual is related to the following products: