Samsung SPH-N300 - Manual (Page 84)

Section 11
84 Changing Your Phone’s Settings
Receiving Data
To receive data with your phone:
1. Make sure that your phone is connected to your
computing device and is powered “on.”
2. From standby mode, press for Main Menu .
3. Press for Wireless Web.
4. Press for Connection .
5. Select Data/Fax In Incoming Data only and press
. (Notice that the phone displays “No incoming
voice calls can be received”. Your phone returns to
standby mode and displays *DATA ONLY* .)
Returning to Voice Mode
Note:
The phone always powers
up in standby mode, even
if it was powered down in
Data/Fax mode. The
phone also returns to
standby mode if the data
cable is disconnected.
To return to standby mode from Data/Fax mode:
1. Make sure that your phone is connected to your
computing device and is powered “on.”
2. From standby mode, press for Main Menu .
3. Press for Wireless Web.
4. Press for Connection .
5. Select Data/Fax In Off: Voice Call Only and press
. (Notice that the phone displays “ No incoming
data/fax calls can be received”. Your phone returns
to standby mode.)