Using the single desktop charger – Samsung SPH-N300 User Manual
Page 25
Getting to Know Your Sprint PCS Phone
25
Getting Started
2
Using the Single Desktop Charger
When you are ready to charge your battery, it is vital that
you use only Sprint PCS-approved desktop chargers and AC
adapter chargers.
1.
Plug the single desktop charger’s power cord into a wall
outlet.
2.
Insert the phone (with the battery installed) into the
front of the charger.
The LED on the front of the phone indicates the following:
ᮣ
A
red light
indicates the battery is charging.
ᮣ
A
green light
indicates the battery is at least 90
percent charged.
ᮣ
A
orange light
indicates that the battery is operating
at a temperature that is too high or too low, or that
there is a poor connection. Make sure the phone is
resting in the charger.
It generally takes about three hours to fully recharge a
completely rundown battery. With the Sprint PCS-approved
LiIon battery, it is practical to recharge the battery before it
becomes completely run down.
To get the quickest charge for any battery:
ᮣ
Turn the phone off.
ᮣ
Plug the phone with the battery attached into the
travel adapter.
ᮣ
Leaving the phone plugged into the travel adapter
fully charged will not harm the battery.