Konica Minolta BIZHUB C30P - Manual (Page 87)

Configuration Menu Overview 73
"
All factory default values are shown in bold.
JOB
TIME-
OUT
Settings
5 seconds-15 seconds-300 seconds
Specify the timeout interval for a print job being received.
ETHER-
NET
TCP/IP ENABLE
Settings
YES /NO
If YES is selected, TCP/IP is enabled.
If NO is selected, TCP/IP is disabled.
IP
ADDRESS
Setting
000.000.000.000
Set the IP address for this printer on the
network.
Use the , , , and keys to
specify the value.
If the IP address is manually specified,
DHCP/BOOTP is automatically set to
OFF .
SUBNET
MASK
Setting
255.255.000.000
Specify the subnet mask for the network.
Use the , , , and keys to
specify the value.
DEFAULT
GATEWAY
Setting
000.000.000.000
Specify the IP address of the router if one
is on the network. Use the , , ,
and keys to specify the value.
DHCP/
BOOTP
Settings
ON /OFF
Select whether or not the IP address is
automatically acquired.
If ON is selected, the IP address is auto-
matically acquired.
If OFF is selected, the IP address is not
automatically acquired.